XT H 450 FOR TURBINE BLADE AND CASTING INSPECTION

Danh mục:

Nikon

Từ khóa:

xray 3d sửa máy x ray công nghiệp , sửa máy x ray công nghiệp , máy kiểm tra x ray , kiểm định an toàn phóng xạ , máy x ray công nghiệp , cho thuê máy x ray , mua bán máy x ray cũ mới , máy x ray cũ mới , xray 3d , x ray 3d , xrf , xrf cũ mới , sửa máy đo xrf

Vận chuyển giao hàng toàn quốc

Phương thức thanh toán linh hoạt

Gọi ngay 0974692294 để mua và đặt hàng nhanh chóng

Mô tả sản phẩm

Unique XT H 450 micro-focus X-ray and CT system for turbine blade and casting inspection

The XT H 450 system offers the necessary source power to penetrate through high density parts and generate a scatter-free CT volume with micron accuracy. The system is available with a flat panel or a proprietary Curved Linear Array (CLA) detector that optimises the collection of the X-rays without capturing the undesired scattered X-rays.

This linear detector realises stunning image sharpness and contrast by avoiding image pollution and associated contrast reduction. 450kV and the CLA are ideal for the inspection of small to medium metal alloy turbine blades and casted parts.

Categories: Computed Tomography

Applications: Damage propagation in composite material, Turbine Blade Inspection, Metal corrosion mechanisms, Unveiling mysteries of nature, Implant research, Aircraft Component Inspection, Powertrain Components, Revealing mysteries of Antikythera Mechanism, Automotive Components Inspection, Rocks/Minerals, Plastic Manufacturing, Metallurgy, Implants/ Protheses, Metal Manufacturing, Gas turbine blades, Automated measurement, Cracks and Failure Analysis, Manual examination

Key benefits

Easy system operation and low cost-of-ownership
High performance image acquisition and volume processing
Proprietary 450kV microfocus X-ray source
Run highly accurate inspection on dense turbine blades
Straightforward inspection automation
Stunning 3D images without scattering provide critical insights

Specifications

Microfocus source	Max. kV	Max. power	Focal spot size	Focal spot size at max power
450 kV Reflection target	450 kV	450 W	80 μm up to 200 W	320 μm at 450 W
450 kV High brilliance source	450 kV	450 W	80 μm up to 200 W	113 μm at 450 W

Detectors	# Bits	Active pixels	Pixel Size	Max. frame rate at 1x1 binning	Max. frame rate at 2x2 binning
Perkin Elmer 1620	16-bit	2000 x 2000	200 µm	3.75 fps	7.5 fps
Perkin Elmer 1621 EHS	16-bit	2000 x 2000	200 µm	15 fps	30 fps
Nikon Metrology CLDA	16-bit	2000	415 µm	50 fps	50 fps
Combination PE162x & CLDA	Configuration with both Flat panel and Curved Linear Diode Array detector

Manipulator
# Axes	4 (optional 5th axis)
Axes travel	(X) 400 mm (Y) 600 mm (Z) 600 mm (Rotate) n*360
Max. sample weight	100kg

General
Cabinet dimensions (LxWxH)	3,613 mm x 1,828 mm x 2,249 mm
Weight	14,000 kg
Safety	All systems are manufactured to IRR99
Control software	All systems are controlled by Nikon Metrology’s in-house Inspect-X software